Super site pour tester les XSS: on récupère un payload, et si il se déclenche quelque part on reçoit une alerte avec plein d'infos (screenshot, ...)

Keynote absolument géniale

Implémentation d'un rootkit LD_PRELOAD

Scanneur en mode shodan, mais non-commercial (?)

Je me dis parfois qu’il serait tellement simple pour un service web de refuser à leurs usagers l’authentification ponctuellement (et/ou à un faible pourcentage) pour obtenir un mot de passe alternatif qui serait très probablement utilisable sur un autre service. C’est même pire car avec ces deux mots de passe (ou plus…), je couvre potentiellement 100% de leurs vies numériques. Ces hypothèses demanderaient à être vérifiées.

Awesome fuzzer.

OS ultra-sécurisé à base de VM (fenêtres toutes dans un workspace, c'est super propre, cf screenshots).

"Delivering Signals for Fun and Profit"

     Understanding, exploiting and preventing signal-handling 
                    related vulnerabilities.

           Michal Zalewski <lcamtuf@razor.bindview.com>
             (C) Copyright 2001 BindView Corporation

0) Introduction

According to a popular belief, writing signal handlers has little or nothing
to do with secure programming, as long as handler code itself looks good.
At the same time, there have been discussions on functions that shall be
invoked from handlers, and functions that shall never, ever be used there.
Most Unix systems provide a standarized set of signal-safe library calls.
Few systems have extensive documentation of signal-safe calls - that includes
OpenBSD, Solaris, etc.:

http://www.openbsd.org/cgi-bin/man.cgi?query=sigaction:

"The following functions are either reentrant or not interruptible by sig-
nals and are async-signal safe. Therefore applications may invoke them,
without restriction, from signal-catching functions:

    _exit(2), access(2), alarm(3), cfgetispeed(3), cfgetospeed(3),
    cfsetispeed(3), cfsetospeed(3), chdir(2), chmod(2), chown(2),
    close(2), creat(2), dup(2), dup2(2), execle(2), execve(2),
    fcntl(2), fork(2), fpathconf(2), fstat(2), fsync(2), getegid(2),
    geteuid(2), getgid(2), getgroups(2), getpgrp(2), getpid(2),
    getppid(2), getuid(2), kill(2), link(2), lseek(2), mkdir(2),
    mkfifo(2), open(2), pathconf(2), pause(2), pipe(2), raise(3),
    read(2), rename(2), rmdir(2), setgid(2), setpgid(2), setsid(2),
    setuid(2), sigaction(2), sigaddset(3), sigdelset(3),
    sigemptyset(3), sigfillset(3), sigismember(3), signal(3),
    sigpending(2), sigprocmask(2), sigsuspend(2), sleep(3), stat(2),
    sysconf(3), tcdrain(3), tcflow(3), tcflush(3), tcgetattr(3),
    tcgetpgrp(3), tcsendbreak(3), tcsetattr(3), tcsetpgrp(3), time(3),
    times(3), umask(2), uname(3), unlink(2), utime(3), wait(2),
    waitpid(2), write(2). sigpause(3), sigset(3).

All functions not in the above list are considered to be unsafe with re-
spect to signals. That is to say, the behaviour of such functions when
called from a signal handler is undefined. In general though, signal
handlers should do little more than set a flag; most other actions are
not safe."

It is suggested to take special care when performing any non-atomic
operations while signal delivery is not blocked, and/or not to rely on
internal program state in signal handler. Generally, signal handlers should
do not much more than setting a flag, whenever it is acceptable.

Unfortunately, there were no known, practical security considerations of
such bad coding practices. And while signal can be delivered anywhere
during the userspace execution of given program, most of programmers never
take enough care to avoid potential implications caused by this fact.
Approximately 80 to 90% of signal handlers we have examined were written
in insecure manner.

This paper is an attempt to demonstrate and analyze actual risks caused by
this kind of coding practices, and to discuss threat scenarios that can be
used by an attacker in order to escalate local privileges, or, sometimes,
gain remote access to a machine. This class of vulnerabilities affects
numerous complex setuid programs (Sendmail, screen, pppd, etc.) and
several network daemons (ftpd, httpd and so on).

Thanks to Theo de Raadt for bringing this problem to my attention;
to Przemyslaw Frasunek for remote attack possibilities discussion; Dvorak,
Chris Evans and Pekka Savola for outstanding contribution to heap corruption
attacks field; Gregory Neil Shapiro and Solar Designer for their comments
on the issues discussed below. Additional thanks to Mark Loveless,
Dave Mann, Matt Power and other RAZOR team members for their support and
reviews.

1) Impact: handler re-entry (Sendmail case)

Before we discuss more generalized attack scenarios, I would like to explain
signal handler races starting with very simple and clean example. We would
try to exploit non-atomic signal handler. The following code generalizes, in
simplified way, very common bad coding practice (which is present, for
example, in setuid root Sendmail program up to 8.11.3 and 8.12.0.Beta7):

/*****

• This is a generic verbose signal handler - does some *
• logging and cleanup, probably calling other routines. *
  *****/

void sighndlr(int dummy) {
syslog(LOG_NOTICE,user_dependent_data);
// Initial cleanup code, calling the following somewhere:
free(global_ptr2);
free(global_ptr1);
// 1 *** >> Additional clean-up code - unlink tmp files, etc <<
exit(0);
}

/**

• This is a signal handler declaration somewhere *

• at the beginning of main code. *
  **/

  signal(SIGHUP,sighndlr);
  signal(SIGTERM,sighndlr);

  // Other initialization routines, and global pointer
  // assignment somewhere in the code (we assume that
  // *** nnn is partially user-dependent, yyy does not have to be):

  global_ptr1=malloc(nnn);
  global_ptr2=malloc(yyy);

  // 2 >> further processing, allocated memory <<
  // 2 >> is filled with any data, etc... <<

This code seems to be pretty immune to any kind of security compromises. But
this is just an illusion. By delivering one of the signals handled by
sighndlr() function somewhere in the middle of main code execution (marked
as ' 2 ' in above example) code execution would reach handler function.
Let's assume we delivered SIGHUP. Syslog message is written, two pointers are
freed, and some more clean-up is done before exiting ( 1 ).

Now, by quickly delivering another signal - SIGTERM (note that already
delivered signal is masked and would be not delivered, so you cannot
deliver SIGHUP, but there is absolutely nothing against delivering SIGTERM) -
attacker might cause sighndlr() function re-entry. This is a very common
condition - 'shared' handlers are declared for SIGQUIT, SIGTERM, SIGINT,
and so on.

Now, for the purpose of this demonstration, we would like to target heap
structures by exploiting free() and syslog() behavior. It is very important
to understand how [v]syslog() implementation works. We would focus on Linux
glibc code - this function creates a temporary copy of the logged message in
so-called memory-buffer stream, which is dynamically allocated using two
malloc() calls - the first one allocates general stream description
structure, and the other one creates actual buffer, which would contain
logged message.

Please refer the following URL for vsyslog() function sources:

http://src.openresources.com/debian/src/libs/HTML/S/glibc_2.0.7t.orig%20glibc-2.0.7t.orig%20misc%20syslog.c.html#101

Stream management functions (open_memstream, etc.) can be found at:

http://src.openresources.com/debian/src/libs/HTML/S/glibc_2.0.7t.orig%20glibc-2.0.7t.orig%20libio%20memstream.c.html#63

In order for this particular attack to be successful, two conditions have
to be met:

• syslog() data must be user-dependent (like in Sendmail log messages
  describing transferred mail traffic),

• second of these two global memory blocks must be aligned the way
  that would be re-used in second open_memstream() malloc() call.

The second buffer (global_ptr2) would be free()d during the first
sighndlr() call, so if these conditions are met, the second syslog()
call would re-use this memory and overwrite this area, including
heap-management structures, with user-dependent syslog() buffer.

Of course, this situation is not limited to two global buffers - generally,
we need one out of any number of free()d buffers to be aligned that way.
Additional possibilities are related to interrupting free() chain by precise
SIGTERM delivery and/or influencing buffer sizes / heap data order by
using different input data patterns.

If so, the attacker can cause second free() pass to be called with a pointer
to user-dependent data (syslog buffer), this leads to instant root compromise

• see excellent article by Chris Evans (based on observations by Pekka Savola):

  http://lwn.net/2000/1012/a/traceroute.php3

Practical discussion and exploit code for the vulnerability discussed in
above article can be found there:

http://security-archive.merton.ox.ac.uk/bugtraq-200010/0084.html

Below is a sample 'vulnerable program' code:

--- vuln.c ---
#include <signal.h>
#include <syslog.h>
#include <string.h>
#include <stdlib.h>

void global1, global2;
char *what;

void sh(int dummy) {
syslog(LOG_NOTICE,"%s\n",what);
free(global2);
free(global1);
sleep(10);
exit(0);
}

int main(int argc,char* argv[]) {
what=argv[1];
global1=strdup(argv[2]);
global2=malloc(340);
signal(SIGHUP,sh);
signal(SIGTERM,sh);
sleep(10);
exit(0);
}
---- EOF ----

You can exploit it, forcing free() to be called on a memory region filled
with 0x41414141 (you can see this value in the registers at the time
of crash -- the bytes represented as 41 in hex are set by the 'A'
input characters in the variable $LOG below). Sample command lines
for a Bash shell are:

$ gcc vuln.c -o vuln
$ PAD=perl -e '{print "x"x410}'
$ LOG=perl -e '{print "A"x100}'
$ ./vuln $LOG $PAD & sleep 1; killall -HUP vuln; sleep 1; killall -TERM vuln

The result should be a segmentation fault followed by nice core dump
(for Linux glibc 2.1.9x and 2.0.7).

(gdb) back
#0 chunk_free (ar_ptr=0x4013dce0, p=0x80499a0) at malloc.c:3069
#1 0x4009b334 in libc_free (mem=0x80499a8) at malloc.c:3043
#2 0x80485b8 in sh ()
#4 0x400d5971 in __libc_nanosleep () from /lib/libc.so.6
#5 0x400d5801 in sleep (seconds=10) at ../sysdeps/unix/sysv/linux/sleep.c:85
#6 0x80485d6 in sh ()

So, as you can see, failure was caused when signal handler was re-entered.
__libf_free function was called with a parameter of 0x080499a8, which points
somewhere in the middle of our AAAs:

(gdb) x/s 0x80499a8
0x80499a8: 'A' <repeats 94 times>, "\n"

You can find 0x41414141 in the registers, as well, showing this data
is being processed. For more analysis, please refer to the paper mentioned
above.

For the description, impact and fix information on Sendmail signal
handling vulnerability, please refer to the RAZOR advisory at:

http://razor.bindview.com/publish/advisories/adv_sm8120.html

Obviously, that is just an example of this attack. Whenever signal handler
execution is non-atomic, attacks of this kind are possible by re-entering
the handler when it is in the middle of performing non-reentrant operations.
Heap damage is the most obvious vector of attack, in this case, but not the
only one.

2) Impact: signal in the middle (screen case)

The attack described above usually requires specific conditions
to be met, and takes advantage of non-atomic signal handler execution,
which can be easily avoided by using additional flags or blocking
signal delivery.

But, as signal can be delivered at any moment (unless explictly blocked),
this is obvious that it is possible to perform an attack without re-entering
the handler itself. It is enough to deliver a signal in a 'not appropriate'
moment. There are two attack schemes:

A) re-entering libc functions:

Every function that is not listed as reentry-safe is a potential source
of vulnerabilities. Indeed, numerous library functions are operating
on global variables, and/or modify global state in non-atomic way.
Once again, heap-management routines are probably the best example.
By delivering a signal when malloc(), free() or any other libcall of
this kind is being called, all subsequent calls to the heap management
routines made from signal handler would have unpredictable effect,
as heap state is completely unpredictable for the programmer.

Other good examples are functions working on static/global variables
and buffers like certain implementations of strtok(), inet_ntoa(),
gethostbyname() and so on. In all cases, results will be unpredictable.

B) interrupting non-atomic modifications:

This is basically the same problem, but outside library functions.
For example, the following code:

 dropped_privileges = 1;
 setuid(getuid());

is, technically speaking, using safe library functions only. But,
at the same time, it is possible to interrupt execution between
substitution and setuid() call, causing signal handler to be executed
with dropped_privileges flag set, but superuser privileges not dropped.

This, very often, might be a source of serious problems.

First of all, we would like to come back to Sendmail example, to
demonstrate potential consequences of re-entering libc. Note that signal
handler is NOT re-entered - signal is delivered only once:

#0 0x401705bc in chunk_free (ar_ptr=0x40212ce0, p=0x810f900) at malloc.c:3117 #1 0x4016fd12 in chunk_alloc (ar_ptr=0x40212ce0, nb=8200) at malloc.c:2601
#2 0x4016f7e6 in __libc_malloc (bytes=8192) at malloc.c:2703
#3 0x40168a27 in open_memstream (bufloc=0xbfff97bc, sizeloc=0xbfff97c0) at memstream.c:112
#4 0x401cf4fa in vsyslog (pri=6, fmt=0x80a5e03 "%s: %s", ap=0xbfff99ac) at syslog.c:142
#5 0x401cf447 in syslog (pri=6, fmt=0x80a5e03 "%s: %s") at syslog.c:102
#6 0x8055f64 in sm_syslog ()
#7 0x806793c in logsender ()
#8 0x8063902 in dropenvelope ()
#9 0x804e717 in finis ()
#10 0x804e9d8 in intsig () <---- SIGINT
#11 <signal handler called>
#12 chunk_alloc (ar_ptr=0x40212ce0, nb=4104) at malloc.c:2968
#13 0x4016f7e6 in __libc_malloc (bytes=4097) at malloc.c:2703

Heap corruption is caused by interruped malloc() call and, later, by
calling malloc() once again from vsyslog() function invoked from handler.

There are two another examples of very interesting stack corruption caused by
re-entering heap management routines in Sendmail daemon - in both cases,
signal was delivered only once:

A)

#0 0x401705bc in chunk_free (ar_ptr=0xdbdbdbdb, p=0x810b8e8) at malloc.c:3117
#1 0xdbdbdbdb in ?? ()

B)

/.../
#9 0x79f68510 in ?? ()
Cannot access memory at address 0xc483c689

We'd like to leave this one as an exercise for a reader - try to figure
out why this happens and why this problem can be exploitable. For now,
we would like to come back to our second scenario, interrupting non-atomic
code to show that targeting heap is not the only possibility.

Some programs are temporarily returning to superuser UID in cleanup
routines, e.g., in order to unlink specific files. Very often, by entering
the handler at given moment, is possible to perform all the cleanup file
access operations with superuser privileges.

Here's an example of such coding, that can be found mainly in
interactive setuid software:

--- vuln2.c ---
#include <signal.h>
#include <string.h>
#include <stdlib.h>

void sh(int dummy) {
printf("Running with uid=%d euid=%d\n",getuid(),geteuid());
}

int main(int argc,char* argv[]) {
seteuid(getuid());
setreuid(0,getuid());
signal(SIGTERM,sh);
sleep(5);

// this is a temporarily privileged code:
seteuid(0);
unlink("tmpfile");
sleep(5);
seteuid(getuid());

exit(0);
}
---- EOF ----

gcc vuln.c -o vuln; chmod 4755 vuln

su user

$ ./vuln & sleep 3; killall -TERM vuln; sleep 3; killall -TERM vuln
Running with uid=500 euid=500
Running with uid=500 euid=0

Such a coding practice can be found, par example, in 'screen' utility
developed by Oliver Laumann. One of the most obvious locations is CoreDump
handler [screen.c]:

static sigret_t
CoreDump SIGDEFARG
{
/.../
setgid(getgid());
setuid(getuid());
unlink("core");
/.../

SIGSEGV can be delivered in the middle of user-initiated screen detach
routine, for example. To better understand what and why is going on,
here's an strace output for detach (Ctrl+A, D) command:

23534 geteuid() = 0
23534 geteuid() = 0
23534 getuid() = 500
23534 setreuid(0, 500) = 0 HERE IT HAPPENS
23534 getegid() = 500
23534 chmod("/home/lcamtuf/.screen/23534.tty5.nimue", 0600) = 0
23534 utime("/home/lcamtuf/.screen/23534.tty5.nimue", NULL) = 0
23534 geteuid() = 500
23534 getuid() = 0

Marked line sets uid to zero. If SIGSEGV is delivered somewhere near this
point, CoreDump() handler would run with superuser privileges, due to
initial setuid(getuid()).

3) Remote exploitation of signal delivery (WU-FTPD case)

This is a very interesting issue, directly related to re-entering libc
functions and/or interrupting non-atomic code. Many complex daemons,
like ftp, some http/proxy services, MTAs, etc., have SIGURG handlers declared -
very often these handlers are pretty verbose, calling syslog(), or freeing
some resources allocated for specific connection. The trick is that SIGURG,
obviously, can be delivered over the network, using TCP/IP OOB message.
Thus, it is possible to perform attacks using network layer without
any priviledges.

Below is a SIGURG handler routine, which, with small modifications,
is shared both by BSD ftpd and WU-FTPD daemons:

static VOIDRET myoob FUNCTION((input), int input)
{
/.../
if (getline(cp, 7, stdin) == NULL) {
reply(221, "You could at least say goodbye.");
dologout(0);
}
/.../
}

As you can see in certain conditions, dologout() function is called.
This routine looks this way:

dologout(int status)
{
/.../
if (logged_in) {
delay_signaling(); / we can't allow any signals while euid==0: kinch /
(void) seteuid((uid_t) 0);
wu_logwtmp(ttyline, "", "");
}
if (logging)
syslog(LOG_INFO, "FTP session closed");
/.../
}

As you can see, the authors took an additional precaution not to allow
signal delivery in the "logged_in" case. Unfortunately, syslog() is
a perfect example of a libc function that should NOT be called during
signal handling, regardless of whether "logged_in" or any other
special condition happens to be in effect.

As mentioned before, heap management functions such as malloc() are
called within syslog(), and these functions are not atomic. The OOB
message might arrive when the heap is in virtually any possible state.
Playing with uids / privileges / internal state is an option, as well.

4) Practical considerations: timing

In most cases this is a non-issue for local attacks, as the attacker
might control the execution environment (e.g., the load average, the
number of local files that the daemon needs to access, etc.) and try
a virtually infinite number of times by invoking the same program over
and over again, increasing the possibility of delivering signal at
given point. For remote attacks, this is a major issue, but as long
as the attack itself won't cause service to stop responding, thousands of
attempts might be performed.

5) Solving signal race problems

This is a very complex and difficult task. There are at least three aspects
of this:

• Using reentrant-safe libcalls in signal handlers only. This would
  require major rewrites of numerous programs. Another half-solution is
  to implement a wrapper around every insecure libcall used, having
  special global flag checked to avoid re-entry,

• Blocking signal delivery during all non-atomic operations and/or
  constructing signal handlers in the way that would not rely on
  internal program state (e.g. unconditional setting of specific flag
  and nothing else),

• Blocking signal delivery in signal handlers.

                                                  Michal Zalewski
                                     <lcamtuf@razor.bindview.com>
                                                  16-17 May, 2001

Monsieur l’agent, si je suis placé en garde à vue ou retenu pour une vérification d’identité ou toute autre raison, merci de me le dire et de m’expliquer pourquoi. Si je suis libre de partir, merci de me le dire. Je souhaite exercer tous mes droits, y compris celui de garder le silence et mon droit à m’entretenir avec un avocat avant de faire la moindre déclaration. Je ne compte pas renoncer au moindre de mes droits. Je ne consens à aucune fouille ou perquisition. Je ne consens pas à vider mes poches ou ouvrir mon sac. Cela ne signifie pas que j’y cache quelque chose d’illicite. Cela signifie que si vous me le demandez, j’ai le droit de le refuser, et que j’exerce ce droit. Je ne consens à aucune audition libre et souhaite repartir dès que possible. Je ne signerai aucun procès verbal puisque la loi ne m’oblige pas à le faire, pas plus qu’elle ne m’oblige à en donner les raisons. Je vous prie de ne pas me poser de questions car je ne ferai aucune déclaration avant d’avoir parlé à un avocat, ce qui ne signifie pas que je m’engage à en faire après. Merci de respecter ces droits.

Plutôt que de cracker du WPA… Suffit de créer un faux AP, de faire un peu de social engineering, et pouf…

Faire du MITM sur un wifi ouvert, ok. Mais envoyer des headers pour demander au nivagateur de cacher des fichiers JS vérolés, c'est incroyablement ingénieux…

Site pour faire de freelance en sécurité informatique !

Un super outil pour faire tourner des programmes dans une sandbox tout en restant en userspace. Avec système de fichier virtuel possible.
« mbox apt-get install paquet » fonctionne en user, du coup !